Copyright NeuForce Pneumatics 2006
            Safety Valves - DN 8 and DN 10
DN 8
Certification standards CE 97/23/EG

TÜV
Pressure setting Pe 0.3 bar to 47 bar
Medium Non-toxic, non combustable gases
Temperature range -50 C to +200 C, depending on pressure and gasket material
Installation Orientaion Vertical recommended
Materials Body and most internal parts - BRASS

Spring - Stainless Steel

Lock washer - Steel EN 10270

Gaskets:

Silicone for pressure range 0.3 bar to 2.3 bar

Viton for pressure range 2.4 bar to 47 bar
Nominal Diameter DN 8 mm

The specified rates are measured at 10% (PE <1 bar, + 0,1 bar) pressure rise over the set pressure with compressed air at 20°C. The blowoff rates are different for other gases and temperatures
DN 10
Certification standards CE 97/23/EG

TÜV
Pressure setting Pe 0.3 bar to 37 bar
Medium Non-toxic, non combustable gases
Temperature range -50 C to +200 C, depending on pressure and gasket material
Installation Orientaion Vertical recommended
Materials Body and most internal parts - BRASS

Spring - Stainless Steel

Lock washer - Steel EN 10270

Gaskets:

Silicone for pressure range 0.3 bar to 1.4 bar

Viton for pressure range 1.5 bar to 37 bar
Nominal Diameter DN 10 mm
Model Type L10

The specified rates are measured at 10% (PE <1 bar, + 0,1 bar) pressure rise over the set pressure with compressed air at 20°C. The blowoff rates are different for other gases and temperatures