| Tubing A | 1/2", 3/8", 1/4", 3/16", 1/8", 16mm, 12mm, 10mm, 8mm, 6mm, 4mm |
|---|---|
| Thread A | 1/2BSPT, 3/8BSPT, 1/4BSPT, 1/8BSPT |
| Material | Nickel Plated Brass |
| Connection Style | Threaded-to-Tube |
| Fitting Shape | Tee |
| Fitting Gender | Male |
| Fluid Type | Compressed air |
| Working Pressure | -0.8 ~ 15 Bar |
| Working Temperature | -10 ~ 60°C |
| Application Tube Material | Polyurethane, Nylon, Polyethylene, and Polypropylene |
MPT: Male Tee
Nickel Plated Brass Threaded-to-Tube Male Tee Push-In Fitting: MPT
Male tee nickel-plated Push-In Fittings. Male tee, metric and imperial tube, BSP taper, and metric.
Method of Application
- Make sure that the end of the tube is cut at 90 degrees and free of burrs.
- Push the tube through the ‘collar’ into the fitting.
- Continue pushing the tube past the ‘packing’ allowing the lock claws to fully hold the tube in place. This is to ensure leakages do not occur.
- To remove the tube simply press the sleeve to recess the lock claws then pull out the tube.
