3/8", 1/4", 1/8", 10mm, 8mm, 6mm, 4mm
1/2", 3/8", 1/4", 12mm, 10mm, 8mm, 6mm
Nickel Plated Brass
|Fluid Type||Compressed air|
|Working Pressure||-0.8 ~ 15 Bar|
|Working Temperature||-10 ~ 60°C|
|Application Tube Material||Polyurethane, Nylon, Polyethylene, and Polypropylene|
MPGJ: Plug-In Reducer
Nickel Plated Brass Tube-To-Tube Plug-In Reducer – One Touch Push-In Fitting: MPGJ
Plug-in reducer, metric and imperial tube.
Method of Application
- Make sure that the end of the tube is cut at 90 degrees and free of burrs.
- Push the tube through the ‘collar’ into the fitting.
- Continue pushing the tube past the ‘packing’ allowing the lock claws to fully hold the tube in place. This is to ensure leakages do not occur.
- To remove the tube simply press the sleeve to recess the lock claws then pull out the tube.