1/2", 3/8", 1/4", 3/16", 16mm, 12mm, 10mm, 8mm, 6mm, 4mm
|Vacuum Rating||To 28" Hg|
|Operating Pressure||0 Bar ~ 10 Bar|
|Operating Temperature||-40 ~ 200℃|
|Application Tube Material||Semi-rigid nylon tube, Flexible polyurethane tube, Low density polyurethane tube and Fluoropolymer FEP - 140 tube|
SUT: Union Tee
Stainless Steel Tube-to-Tube Union Tee Push-In Fitting: SUT
Union tee stainless steel push-in fitting. Union tee, metric, and imperial tube.
Stainless steel push-in fittings are made to be non-corrosive and are highly resistant to aggressive environments, as well as corrosive fluids. These push-in fittings ensure easy and fast connection, and the removal of a tube easily.
Method of Application
- Make sure that the end of the tube is cut at 90 degrees and free of burrs.
- Push the tube through the ‘collar’ into the fitting.
- Continue pushing the tube past the ‘packing’ allowing the lock claws to fully hold the tube in place. This is to ensure leakages do not occur.
- To remove the tube simply press the sleeve to recess the lock claws then pull out the tube.