1/2", 3/8", 1/4", 3/16", 16mm, 12mm, 10mm, 8mm, 6mm, 4mm
1/2BSPT, 3/8BSPT, 1/4BSPT, 1/8BSPT, M5
Stainless Steel SS316L
|Vacuum Rating||To 28" Hg|
|Operating Pressure||0 Bar ~ 10 Bar|
|Operating Temperature||-40 ~ 200℃|
|Application Tube Material||Semi-rigid nylon tube, Flexible polyurethane tube, Low density polyurethane tube and Fluoropolymer FEP - 140 tube|
SLS: Male Elbow
Stainless Steel Threaded-to-Tube Male Elbow Push-In Fitting: SLS
Male elbow stainless steel push-in fitting. Male swivel elbow, metric and imperial tube, BSP taper.
Stainless steel push-in fittings are made to be non-corrosive and are highly resistant to aggressive environments, as well as corrosive fluids. These push-in fittings ensure easy and fast connection, and the removal of a tube easily.
The fittings are SS316L and feature green Viton/FKM seals.
Method of Application
- Make sure that the end of the tube is cut at 90 degrees and free of burrs.
- Push the tube through the ‘collar’ into the fitting.
- Continue pushing the tube past the ‘packing’ allowing the lock claws to fully hold the tube in place. This is to ensure leakages do not occur.
- To remove the tube simply press the sleeve to recess the lock claws then pull out the tube.